THE BHARAT ENGINEERING METAL WORKS

MANUFACTURER - EXPORTER & IMPORTER - DEALER OF SHEET METAL MACHINERY AND INDUSTRIAL MACHINERY

BEMW_PRODUCTS BEMW_PRODUCTS BEMW_PRODUCTS BEMW_PRODUCTS BEMW LOGO BEMW_PRODUCTS BEMW_PRODUCTS BEMW_PRODUCTS



Manufacturer
Exporter - Importer


  • Sheet Metal Machinery
  • Industrial Machinery
  • Rolling Mill
  • Hot Rolling Mill
  • Cold Rolling Mill
  • Cold Re-Rolling Mill
  • Strip Mill
  • Section Rolling Mill
  • Furnace
  • Mould
  • Lead Sheet Rolling Mill
  • Cut to Length line
  • Shearing Machine
  • Friction Screw Press
  • Forging Press
  • Power Press
  • Hydraulic Press
  • Baling Press
  • Plastics Machinery
  • Rubber Machinery
  • Wire Drawing Machine
  • Draw Bench
  • Turnkey Project
  • Ejector Pin
  • Galvanising Plant
  • Straightening Machines
  • Coilers And De-coilers
  • Anti Vibration Mount
  • Soap Process Machine
  • Riot Control Equipment
  • Polycarbonate products

ELECTRIC FURNACE - OIL FIRED FURNACE

MANUFACTURERS AND EXPORTERS OF ALL FURNACES

MELTING FURNACES
ANNEALING FURNACES
SLAB OR BILLET HEATING FURNACES
GALVANIZING FURNACES
ROLLER HEARTH FURNACES
BOGIE HEARTH FURNACES
DROP BOTTOM FURNACES
ROTARY HEARTH FURNACES
ALUMINIUM AGEING FURNACES
OVENS
PUSHER FURNACES
BELL FURNACES
CAR TUNNEL KILNS
CONTINUOUS LINES
ACCESSORIES

MELTING FURNACES (OIL FIRED)

a) UNDERGROUND CRUCIBLE FITTED
UNDER GROUND FURNACE or PIT FURNACE

Pit Furnace is fitted up to floor level with fabricated structure and fire bricks covered to heavy capacity Crucibles with burners and blower with oil pipe connection complete to melt Non-Ferrous metal scraps and taken out by pouring bowl and pour again in hand operated small crucible and again poured in suitable types of moulds.
Top loading Pit Furnaces are used for Annealing, Normalizing, tempering of or for heat in batch loads, in a relatively small floor space. Up to 3 M in diameter and available in temperature range from 25 degree C to 1000 degree C . Unit can be supplied with Re-Circulation and atmosphere control, if required.

b) FLOOR LEVEL CRUCIBLE FITTED
Floor level crucible are fitted in heavy duty supporting M.S. fabricated structure and fire bricks covered to the heavy capacity crucibles with burners and heavy duty blower with complete oil pipe connection to melt Non-ferrous metal scraps.

Heavy structure section platform will be made to take out metals by pouring bowls and Pour again in hand operated small crucibles and again pour in suitable types of moulds.

c) TILTING TYPE MELTING FURNACE
CONSTRUCTION: The furnace body is completely M.S. fabricated structure with suitable robust supports with frame and heavy bearing blocks for tilting the furnace body and fire bricks are covered to heavy capacity. Crucible and Fabricated platform for standing melter.

Burners, Blower and complete oil pipes connection will be fitted to furnace.Special air-ports are cast as an integral part of the casting there are no Tubers in the air being fed by motor and fan at the top of the furnace.

The action of hot air blast and air ports arrangement eliminates completely any danger of fire bar clinker.

Again due to the method and manner of combustion, Sulphur pick-up is negligible and oxidation considerably reduced.

The Actual Design which reduces heat losses by some 50%, the special Block Seam Monolithic Lining installed of which we are the Manufacturer, contains a large percentage of insulating properties and reducing heat losses. The furnaces may be oil-fired or gas-fired or electric type.

ANNEALLING FURNACE (OIL FIRED)

a) DIRECT HEATING OIL-FIRED FURNACE

Frame is made with heavy structures of plates and all sections welded with full supports and complete fire bricks lining will be done for proper heating of all metals with direct heating through burners and heavy blower, pipe line fitting, H .D .Door, hand operated type.

b) MUFFLE-TYPE TWIN CHAMBER OIL-FIRED FURNACE
Same above type structures but instead direct heating of ferrous and non-ferrous metals, muffle-type furnace means extra fire bricks lining of some height will be mounted of all sides after some distant and heat will come to the metals through other bricks called Muffle-type Twin Chamber, Annealing Furnace, Chamber Superb Heat Insulated, uniform Temperature. Heavy duty mechanically operated-counter balanced. Suitable for ferrous and non-ferrous sheets, strips and circles. Maximum temperature 800 degree Centigrade. Capacity: 500 Kgs to 2000 Kgs.

SLABS AND BILLETS HEATING FURNACE PUSHER TYPE

a) SCREW TYPE
Same above type structures with extra long frame with brick linings for slabs and billets heating furnace stock, manipulated by Reversible motorised screw type Pusher.

b) Same above type structures with extra long frame with bricks lining for slabs and billets heating furnace stock, manipulated by reversible Hydraulically operated by complete pusher type.

GALVANIZING FURNACE
Galvanizing Furnaces are supplied independently, or installation for continuous or batch Galvanizing of Coils, Sheets, Steel Wires, Tubes, Structures, Octagonal Poles and High Mast, structures etc. Furnaces are Electric, Gas or Oil-Fired with temperature control and Machined. System includes handling of materials, controls, cleaning range, and annealing units. Furnaces are supplied with High-Temp Circulators, Molten metal pumps etc.

ROLLER HEARTH FURNACE
Constant Hearth speed for these furnaces are uniform processing work trays or continuous loads. Complete furnaces are supplied with various sizes and pitches of rollers centrifugally cast from High Alloy Steels. Furnaces are best for Heat Treatment, Tubes, Pipes, and Automobile Industries. Electrically - heated Oil or Gas Fired, Furnaces are available in temperatures ranging 600 degrees C to 1200 degrees C with or without controlled atmosphere and

Sizes:
500 mm wide x 5 Meter Long
2000 mm wide x 15 meter Long.
Complete with charge and discharge tables, drives control panel instruments etc.

BOGIE HEARTH FURNACE
Furnaces are the most common and all types of furnaces are used for Stress-Relieving, Normalizing, Homogenizing and Annealing,

Sizes :
1 meter wide x 2 Meter Long
6 Meter wide x 20 Meter Long
Electric, Gas or Oil Heated with a wide Range of Control / Haulage Drives / Configurations.

DROP BOTTOM FURNACE
These furnaces have high reputation in the industry for solution heat treating Aluminum and fast quench to the most rigorous specifications that exist. Many options are available to customize the furnaces for operation.

ROTARY HEARTH FURNACE
On the Site Built Furnaces offer one-position loading and unloading and excellent Temperature uniformity required in forgings or Heat treatment. Furnaces are supplied complete with controls, drives, rails etc.

ALUMINIUM AGEING OVEN
Ovens are suitable for various grades of Aluminum and in any configuration, and available in all sizes custom built to the valued client's specific needs with the back up of Engineering.

OVEN
Ovens are made on international designs as per clients requirements, and to process fuel method of work handing, production etc. Designs of Ovens include rugged construction, high safety features and other standard unique features. Ovens are available in a wide range of temperatures and sizes and with optional features as Temperature Recorders, Program Controllers, Timers. Oven Furnitures etc.

PUSHER FURNACE
Furnaces are designed for high volume production of essentially similar parts. Oil or Gas-energized furnaces include Electro-Mechanical or Hydraulic Pusher Arrangement in one to two rows, complete with skids, discharge tables and ejectors

BELL FURNACE
Furnaces are vertical Loading, Horizontal Traveling Furnaces provide Quite Movement for Annealing, Stress Relieving, and other long and controlled cycles of heat treatment. Provide ease of operation with heavy loads, also available in diameter up to 3 Meters, power rating up to 1000 KW and temperatures up to 1000 degrees C with atmosphere systems.

CAR TUNNEL KILN
Furnaces are designed for High Volumes. Kilns are built to handle heavy loads on continuous basis and require minimum labour, have low operating costs. Available in a wide range of sizes.

CONTINUOUS LINES
Stress-Relieving patenting, Strand Annealing, or Galvanizing Lines for Carbon Steels, Stainless Steels, Mild Steels Etc. Consists of multiple station arrangement, with cooling equipments to move wire from station to station, and handle various processes and coating operation in a single line. Furnaces are available in continuous up to 40 heads operating simultaneously, complete with Pay-Off, Cleaning Range, Guide Rollers Coiling Equipments, Controls etc.

ACCESSORIES
Pots, work baskets, Zinc tanks, hot metal pumps, circulators of our fast moving accessories with our as required.

Oil fired pusher type furnace Double door furnace Tilting furnace Annealing Furnace Oil fired pusher type furnace Pusher type Furnace Oil fired pusher type furnace
Top of page
Site designed by KUSHALtechnology