|
HYDRAULIC PRESS
C " frame Hydraulic presses " are used in Pressing, Bending,
Straightening, Punching, Broaching, Riveting etc.
These are used in production or maintenance.
The specifications may be altered as per individual needs.
Heavy Duty Construction.
Rigid Frame under Full Load.
Operated with Built in or Separate Power Pack
through Push button or Foot Switch.
Capacity .: 6.3 Tons to 100 Tons
Stroke . .: 50 mm to 500 mm
Daylight .: From 150 mm to 800 mm
Table Size: From 300 mm x 300 mm to 800mm x 1000 mm
Heavy Duty Closed Body construction Hydraulic Press.
Rigid Frame under full load.
Operated with Built in or Separate Power Pack through
Push button or Foot switch.
Capacity .: 25 Tons to 500 Tons
Stroke . .: From 200 mm to 650 mm
Daylight .: From 300 mm to 1200 mm
Table Size: From 300 mm x 300 mm to 1200 mm x 1200 mm.
* Closed Frame Presses are used for Blanking, Compacting,
Moulding, Embossing, Punching, Deep Drawing, Coining,
Forming and general other applications. These can be operated
either manually or with push buttons.
The specifications may be altered as per individual needs.
Heavy Duty Four Pillars construction Hydraulic Press.
Large Daylight.
Rigid Frame under Full Load.
Operated with Separate Power Pack through
Push Button or Manually.
Capacity .: 25 Tons to 500 Tons
Stroke . .: From 200 mm to 600 mm
Daylight .: From 300 mm to 1200 mm
Table Size: From 300 mm x 300 mm to 1200 mm x 1200 mm
Four Pillar Type Presses are used for Blanking, Embossing,
Moulding, Punching, Deep Drawing, Coining, Forming and
general other applications. These can be operated either
manually or with push buttons.
The specifications may be altered as per individual needs.
Heavy Duty Closed Body Steel Fabricated Construction
Rubber Moulding Hydraulic Press.
*Single or Multiple Daylights.
*Platen Heating can be Electrically, Steam, or By Thermic Oil.
*Single or Double acting.
*Rigid Frame under Full Load.
*Operated Manually with D.C Valve or Push Button.
*Capacity . : 10 Tons to 1500 Tons
*Stroke . . : From 150 mm to 800 mm
*Daylight . : From 300 mm to 1200 mm
*Platen Size: From 300 mm x 300 mm to 1200 mm x 1200 mm
The Hydraulics in Rubber processing industry through Hydraulic
Presses is most convenient and accurate method, hydraulic is
Up Stroking & Down Stroking, Hot Platen Hydraulic Presses
serve the purpose.These presses are of closed frame type or
four pillar type.These presses are used for moulding Automobile
rubber components, Rubber seals ,V belts, Conveyor belt making,
Flap moulding plastic, Bakelite panels for wood, Plywood & Board
finishing etc.These moulding presses include Compression / Transfer
moulding & Automatic 4 Plate mould opening with sledding table.
It has a range up to 1500 tons with programmable Logic Control
System with digital read out facility. Also we provide Throat type
press which are of compact with high operating speeds.
The specifications may be altered as per individual needs.
|
|
