SECONDHAND 4 ROLL PLATE BENDING MACHINE [88004]
Available in India
In excellent working condition with accessories with the following specification.
MACHINE DETAILS
Make: M/s. Fujicar manufacturing Co., Ltd., Osaka, Japan.
Date of commissioning: 15.05.1967.
Machine Type: NICHMANN
Total Weight: 600 Tons (Approx)
APPLICATION
The machine is a Four Roller Plate bending Machine with
Pre-loading Device for cylindrical rolling of steel plates
(yield stress of 26 Kg/mm2) of
60 mm (thick) x 8000 mm (width) – in Cold Stage and
120 mm (thick) x 8000 mm (width) – in Hot Stage at 900 Deg C.
Apart from Cylindrical bending, pre-bending of the plate edges
can also be accomplished using this machine.
The adjustment of bending diameter of the product shall be
done by raising or lowering the side rolls and the driving of
steel plate accomplished by the top roll.
The work piece shall be held tightly between top and bottom rolls.
The Roller adjustments and Pre-Load functions are operated by
Hydraulic Systems for which a new Hydralic Power Pack is available
in the Machine.
CAPACITY
Admissible Maximum width of Plate: 8000 mm
Minimum Internal diameter of Rolled cylinder (Rolling): 1300 mm
Diameter of Top roll (1 No.): 1050 mm
Diameter of Bottom roll (1 No.): 800 mm
Diameter of Side rolls (2 Nos.): 720 mm
Bending speed: 3 & 10 m / min.
Adjusting speed of side rolls: 60 to 300 mm / min.
Motors
Main motor for driving of top roll: 300 KW (16 p)
Motor for adjusting of side rolls: 125 KW (16 p)
Motor for Hydraulic pump: 30 KW (6 p)
SPARES
Muff coupling 210x80x290
Qty - 1 set
Muff coupling 240x100x365
Qty - 2 set
Muff coupling 170x65x240
Qty – 2 set
Flange Cast Iron 550 x 365 x 22
Qty – 6
Sliding Plate Cast iron 870 x 300 x 25
Qty – 2
Sliding Plate Cast iron 575 x 120 x 10
Qty – 2
Sliding Plate Cast iron 1140 x 105 x 25
Qty – 3
Sliding Plate Cast iron 1140 x 170 x 25
Qty – 3
BRAND NEW Pyramid Type Plate Bending Machine [87163]
Size : 32 mm X 2500 mm
BRAND NEW Plate Bending Machine [87164]
Size : 20 mm X 6 metres
BRAND NEW Plate Bending Machine [87165]
Size : 16 mm X 2500 mm
BRAND NEW Plate Bending Machine [87166]
Size : 15 mm X 2000 mm
BRAND NEW Plate Bending Machine [87167]
Size : 25 mm X 2000 mm
BRAND NEW Plate Bending Machine [87168]
Size : 15 mm X 1800 mm
Plate Bending Machine [87169]
Size : 15 mm X 2000 mm
